Cleaning, Sanitation And Maintenance - Scotsman Ice CU1526 Manuel D'installation

CU1526, CU2026, CU3030
Installation Manual

Cleaning, Sanitation and Maintenance

This ice system requires three types of maintenance:
•
Remove the build up of mineral scale from the ice machine's water system and sensors.
•
Sanitize the ice machine's water system and the ice storage bin.
•
Clean or replace the air filter and clean the air cooled condenser (air cooled models only).
It is the User's responsibility to keep the ice machine and ice storage bin in a sanitary condition.
Sanitize the ice storage bin as frequently as local health codes require, and every time the ice machine
is cleaned and sanitized.
The ice machine's water system should be cleaned and sanitized a minimum of twice per year.
Air cooled condenser filter
1. Remove filter from left front grill.
2. Wash the dust and dirt from the filter.
3. Return it to its original position.
Do not operate the machine without the filter in
place except during cleaning.
Air cooled condenser
If the machine has been operated without a filter
the air cooled condenser fins will need to be
cleaned.
They are located under the fan blades. The
services of a refrigeration technician will be
required to clean the condenser.
Exterior Panels
The front and side panels are durable stainless
steel. Fingerprints, dust and grease will require
cleaning with a good quality stainless steel cleaner.
Water filters
If the machine has been connected to water filters,
check the cartridges for the date they were
replaced or for the pressure on the gauge. Change
cartridges if they've been installed more than 6
months or if the pressure drops too much when the
ice machine fills with water.
2007
Page 12