Use And Operation - Scotsman Ice CU1526 Manuel D'installation

Masquer les pouces Voir aussi pour CU1526:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

CU1526, CU2026, CU3030
Installation Manual

Use and Operation

Once started, the ice machine will automatically
make ice until the bin is full of ice. When ice level
drops, the ice machine will resume making ice.
There are four indicator lights at the front of the
control box that provide information on the
condition of the machine.
Indicator Lights:
Power
Status
Water
De-scale & Sanitize
Power
Steady Green
Normal
Self Test
Blinking Green
Failure
Blinking Red
-
Yellow
-
Blinking
-
Yellow
Light off
No power
All Blinking
Unit remotely locked out – check with leasing company
If the Water light is on, the machine has sensed a
lack of water. Check the water supply to the
machine. The water could have been shut off or the
water filter cartridges might need to be changed.
If the De-Scale light is on, the machine has
determined that it needs to be cleaned. Contact an
authorized Scotsman service agent and have the
machine cleaned, de-scaled and sanitized.
Indicator Lights & Their Meanings
Status
Normal – bin full or making ice
Switching on or off
Diagnostic shutdown or, if making
ice, temperature sensor failure
-
-
Switched off
Note: A Component Indicator Light switches ON to
indicate that the component is operating.
Note: There are two Curtain Switch lights, SW1 and
SW2. These single plate models have one curtain
switch light on all the time, as a curtain switch light
is ON when a curtain is either open or not present.
2007
Page 10
Water
De-Scale & Sanitize
-
-
-
-
Lack of
-
water
Time to de-scale and
-
sanitize
-
In Cleaning mode
Normal
Normal

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cu2026Cu3030

Table des Matières