Tempspray - WAGNER ProSpray 3.39 Mode D'emploi

12.5

TempSpray

The paint material is heated to the required temperature uniformly by an electric heating element, which is located inside the hose
(regulated from 20°C to 60°C).
Advantages:
• Constant paint temperature even at low outside temperatures
• Considerably better working of high viscosity coating materials
• Increased application efficiency
• Savings in solvents due to reduction in viscosity
• Adaptable to all airless units
Order No. Description
TempSpray H 126 (ideal for lacquer jobs)
2311659
Basic unit 1/4" incl. stainless steel hose, DN6, 1/4", 10m
2311852
Spraypack consisting of: basic unit (2311659), Airless gun AG 14 NPS 1/4", incl. Trade Tip 2 nozzler holder
(F-thread) and Trade Tip 2 Fine Finish 410
TempSpray H 226 (ideal for dispersions/materials with high viscosity)
2311660 Basic unit 1/4" incl. Hose reel, heated hose DN10, 15m, hose 1/4" DN4, 1m
2311853 Spraypack consisting of: Basic unit (2311660), Airless gun AG 14 NPS 1/4", incl. Trade Tip 2 nozzler holder
(F-thread) and Trade Tip 2 nozzle 419
TempSpray H 326 (ideal for dispersions/materials with high viscosity)
2311661 Basic unit 1/4" incl. Hose reel, heated hose DN10, 30m, hose 1/4" DN4, 1m
2311854 Spraypack consisting of: Basic unit (2311661), Airless gun AG 14 NPS 1/4", incl. Trade Tip 2 nozzler holder
(F-thread) and Trade Tip 2 nozzle 421
ProSpray 3.39
TempSpray H 126
GB
41
Appendix
TempSpray H 226
TempSpray H 326