Specifying The Personal Data Number For Measurement - Tanita InnerScan DUAL Manuel D'utilisation

Specifying the Personal Data Number for Measurement

Follow these instructions if the monitor continues to mis-recognize your number.
When the power is off, press the button to start measuring.
1.
Select your personal number using the buttons and then press the button.
2.
Step onto the monitor when "0.00kg" (0.0lb, 0.0stlb) appears in the display.
The monitor turns off automatically after displaying the measurement results.
Note:
・When the monitor is connected to the iPhone and measurement data is saved in the monitor,
lights in the personal data display screen and the measurement result display screen.
・If there are more than 6 sets of data stored, the number of saved sets of data is displayed after the personal data display lights.
・Up to 10 sets of measurement data can be stored in the monitor.
・If you step onto the monitor before 0.00kg (0.0lb, 0.0stlb) is displayed, "Err,-OL" is displayed and the power turns off during
measurement.
14