V-ZUG AdorinaLavage V400 Mode D'emploi page 102

Finally, "-" symbol indicating the cold wash option appears on the display.
C
No change can be made in programmes where temperature adjustment is not allowed.
You can also change the temperature after the washing starts. This change can be made if the
washing steps allow it. Changes cannot be made if the steps do not allow it.
C
If you scroll to cold wash option and press Temperature Adjustment button again, the recommended maximum
temperature for the selected programme appears on the display. Press the Temperature Adjustment button again
to decrease the temperature.
6.8 Spin speed selection
Whenever a new programme is selected, the recommended spin speed of the selected programme is
displayed on the Spin Speed indicator.
C
It is possible that the recommended spin speed value is not the maximum spin speed that can be selected for the
current programme.
Press the Spin Speed Adjustment button to change the spin speed. Spin speed decreases
gradually.
Then, depending on the model of the product, "Rinse Hold" and "No Spin" options appear on the
display.
C
Spin Speed Adjustment button only serves for decreasing the spin speed.
Rinse Hold option is indicated with "ı_ı" symbol and No Spin option is indicated with "_" symbol.
If you are not going to unload your laundry immediately after the programme completes, you can use
Rinse Hold function in order to prevent them from getting wrinkled when there is no water in the
machine.
This function holds the laundry in the final rinsing water.
If you want to spin your laundry after the Rinse Hold function:
- Adjust the Spin Speed.
- Press Start / Pause / Cancel button. The programme resumes. Machine spins the laundry by
discharging the water.
Stop after rinsing
If you are not going to unload your clothes immediately after the programme completes, you can
use rinse hold function to keep your laundry in the final rinsing water in order to prevent them from
getting wrinkled when there is no water in the machine. Press Start / Pause button after this process
if you want to drain the water without spinning your laundry. Programme will resume and complete
after draining the water.
102 / EN
0 C
-
88:88
1888
88
0 C
88:88
1888
88
0 C
88:88
Washing Machine / Operating instructions