Exchanger top lining.
Heat exchanger cover.
Cylinder positioner.
Cylinder of the turbulator. Stage 2. (x7)
Cylinder of the turbulator. Stage 1. (x7)
Helical coupler positioned.
Helical coupler of the turbulator. Stage 2. (x7)
Helical coupler of the turbulator. Stage 1. (x7)
Once the discharge connection has been disassembled, we shall clean the system parts and the smoke ways.
When the cleaning is over, re-assemble the system.
5.3.
Fireplace.
Clean the walls of the combustion chamber, as well as the basket (see section 5.13.).
Access to the boiler's main body assembly.
5.4.
Cleaning hatches.
To access the cleaning hatches, we must first remove the left-hand side of the lining and the sheets that seal
them. Once we have access to the hatches, clean them.
40
Drawing 18
Drawing 19