GUTMANN Amplia Mode D'emploi page 93

7. INSTALLATION INSTRUCTIONS
1. Determine the location of the mounting holes, referring to the indicated measures.
Any missing measures depend on the model of the hood and must be set on the
very hood.
Be sure to leave enough space between the bottom edge of the hood and the hob.
- 2 holes (Ø10 mm) for fixing the hood (above)
- 2 holes (Ø 8 mm) for fixing the hood (below).
- 2 holes (Ø6 mm) for hanging the upper column (support clamp of the TOWER).
Caution: Only for hoods with Tower!
Caution: place the hood in a central position as to the hob.
2. Drill the holes and place the inlays.
3. Mount the support bracket for the upper column.
ONLY FOR HOODS WITH TOWER!
en
25