Cooling Functioning - emmeti XECO Serie Manuel D'installation

8. AIR CONDITIONER USE
8.2 Fun functioning
 Press the MODE key to select the
The air conditioner recirculates the ambient air without heating or
cooling it.
2 The temperature can be set but has no effect
3 Press the FAN key to set the desired fan speed:
AUTO
Auto* Low
* The fan speed varies according to the preset temperature.
4 By pushing the button please select the desired flaps position.
OFF

8.3 Cooling functioning

 Press the MODE key to select the
- +
 Use the keys to set the desired room temperature (16÷30 °C).
The temperature can be set degree by degree.
 Use the FAN key to select the desired fan speed:
AUTO
Auto* Low
* The fan speed varies according to the preset temperature.
4 By pushing the button please select the desired flaps position.
OFF
Nota
Once the set temperature is reached, the outdoor unit will stop, and the
internal unit fan will continue to turn based on the set speed.
Condensation drops can appear on the surface if the air conditioner
works for long periods of time under high humidity conditions.
8.3.1 Anti-cool air protection
When the anti-freeze protection of the internal unit exchanger works,
the external unit stops, while the fan of the internal unit goes on working
according to the set speed . Temperature display will show E2 code
64
operating mode.
Medium High
operating mode.
Medium High
GB GB
AUTO
AUTO