emmeti XECO Serie Manuel D'installation page 62

7. PARTS AND FUNCTIONS
7.1.2 How to insert batteries in the infrared remote control
The infrared remote control is powered by two 1.5 Volt alkaline batteries
(type AAA).
 Remove the cover of the battery compartment.
 Insert the batteries observing the right polarities (+/-).
 Close the battery compartment.
 Set the clock following the instructions set out in paragraph 8.7.
Note
If display is illegible or trembling, replace batteries once again.
Attention!
• Never use previously used batteries.
• Remove batteries from remote control when the air conditioner is not used
for a long period of time.
62
7.1.3 Remote control installation
The infrared remote control can be applied to the wall by means of the
special support.
GB GB