Before Using The Device; Delivery Status - Gloria MultiBrush Mode D'emploi

Masquer les pouces Voir aussi pour MultiBrush:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

– the device may have been dropped
before.
– foreign objects have wrapped
around the drive shaft.
Never disable any safety devices.
Check area to be cleaned beforehand
to avoid damage to device/objects or
injuries to living beings. Stones,
pieces of wood, wires or the like, as
well as other foreign objects must be
removed. Objects that are caught by
the brushing equipment can be flung
out uncontrollably. Keep bystanders
away from the danger zone. In order
to prevent injuries, pay attention
to safety in the work area.
Never use the device on house
walls or similar, always work
vertic ally so that the brushes are
pointed at the ground.
Ensure that the ventilation slots
are free of dirt.
CAUTION! RISK OF INJURY
FROM ROTATING BRUSHING
TOOL!
Never start the device
in a tilted position!
Never put your hands
or feet near to the rotat -
ing brushing equip-
ment! Ensure that suf-
ficient distance is kept
between hands, feet
and brushing equip-
ment. Brushing tools
continue to turn.
Never lift or carry the device with
running motor! Switch motor off
and disconnect mains plug when
moving device to and from work
area, or tilting device.
Never remove the supplied safety
guards.
CAUTION! RISK OF INJURY
FROM FLYING PARTS!
Do not start or operate
the device if bystanders
are in the danger zone.
Start or operate the
device as described in the
operating instructions.
The safety start switch must never
be fixed or short-circuited.
Only clean during daylight or
with adequate artificial lighting.
Never use the device during rain.
Never clean if others, in particular
children or animals,
are in the area!
During cleaning, pay attention to
safe and solid position.
Guide device only at walking
pace.
CAUTION! RISK OF INJURY
FROM UNINTENTIONAL
SWITCH ON!
Accidental activation can cause
injuries. To prevent this, unplug
mains plug when:
– leaving device unsupervised.
– maintaining, checking or cleaning
device.
– device shows signs of
malfunction.
3

Before using the device

This chapter contains information about
the delivery status.

3.1 Delivery status

The device is shipped as standard as fol-
lows:
Device pre-assembled with telescopic
tube
Second handle on telescopic tube
Surface brush with safety guard
Joint brush with safety guard
1 x user manual and product inform a -
tion
Any tools are individually packed.
23

Publicité

Table des Matières
loading

Table des Matières