BE 66DX40GG1 Mode D'emploi page 9

1.
3.
2.
4.
5.
6.
1. Spray Gun - Controls the application of water onto cleaning surface with trigger
device. Includes trigger lock. Allows you to switch between various spray tips.
2. High Pressure Hose - Designed to withstand the pressure created by the pump.
3. Fuel Tank - Fill tank with regular, unleaded fuel. Always leave room for fuel expan-
sion.
4. Unloader Pressure is preset from the factory.
5. Pump - Develops high pressure. Connect the garden hose to the inlet of the water
pump, and connect the high-pressure hose to the outlet. Connections vary by
model.
6. Detergent Siphoning Hose - Used to draw detergent into the low pressure stream.
7. Muffler/Exhaust - Reduces noise of the engine and expels heat.
8. Air Filter - Protects engine by filtering dust and debris out of intake air.
9. Spray Tips - Detergent, 0°, 15°, and 40°: for various cleaning applications.
For the location of engine components such as the choke lever, throttle, and ON/OFF
switch (if applicable), refer to the engine user manual included with your pressure washer.
For more reference material, (spec sheets, part breakdowns, product photos and more),
please visit: www.bepowerequipment.com
16
GAS WASHER COMPONENTS
9.
8.
7.
WWW.BEPOWEREQUIPMENT.COM
GAS WASHER COMPONENTS
1.
12.
11.
10.
9.
8.
7.
1. Spray Gun Controls the application of water onto cleaning surface with trigger
device. Includes trigger lock. Allows you to switch between various spray tips.
2. Spray Tips Detergent, 0°, 15°, and 40°: for various high pressure cleaning
applications.
3. High Pressure Hose Designed to withstand the pressure generated by the pump.
4. Unloader Pressure is preset from the factory.
5. Pump Develops high pressure. Connect the garden hose to the inlet of the water
pump, and connect the high-pressure hose to the outlet.
6. Detergent Siphoning Hose Use to siphon pressure washer safe detergent into the
low pressure stream.
7. Engine Switch Set switch to "On" for recoil starting. Set switch to "Off" to stop a
running engine.
8. Recoil Starter Used for starting the engine manually.
9. (Top) Choke Lever Prepares a cold engine for starting.
(Bottom) Fuel Valve Used to turn fuel supply on and off to engine.
10. Throttle Lever Sets engine in starting mode for recoil starter.
11. Air Filter Protects engine by filtering dust and debris out of intake air.
12. Fuel Tank Fill tank with regular unleaded fuel. Always leave room for fuel expansion.
WWW.BEPOWEREQUIPMENT.COM
2.
3.
4.
5.
6.
17