Storing The Engine; Other Storage Tips; Maintenance Notes - BE 66DX40GG1 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

When fuel stabilizers are used according to their instructions, there is no need
to drain the gasoline from the engine prior to storage. Run the engine for a
short time to circulate stabilizer throughout the fuel system. Engine and fuel
can then be stored for up to 24 months.
If gasoline is drained, the use of a fuel stabilizer in the storage container is still
recommended to maintain freshness.

Storing the Engine

See the engine operator's manual for instructions on how to properly prepare
the engine for storage.
NOTE: Pump Saver is available as an optional accessory. It is not included with
the pressure washer. Contact your closest authorized dealer to purchase BE
Pump Saver.
To use Pump Saver, make sure the pressure washer is turned off and disconnected
from supply water. Read and follow all instructions and warnings given on the
Pump Saver container.

Other Storage Tips

1. DO NOT store fuel from one season to another unless it has been treated as
described in Protect Fuel System.
2. Replace the fuel container if it starts to rust. Rust and/or dirt in fuel can
cause problems if it's used with this unit.
3. Cover unit with a suitable protective cover that does not retain moisture.
WARNING
Storage covers can be flammable.
• DO NOT place a storage cover over a hot pressure washer.
• Let equipment cool for at least 30 minutes before placing the cover on
the equipment.
4. Store unit in a clean and dry area.
38
STORAGE
WWW.BEPOWEREQUIPMENT.COM

MAINTENANCE NOTES

WWW.BEPOWEREQUIPMENT.COM
39

Publicité

Chapitres

Table des Matières
loading

Table des Matières