BE 66DX40GG1 Mode D'emploi page 7

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

WARNING
The high pressure stream of water that this equipment
produces can cut through skin and its underlying tissues,
leading to serious injury and possible amputation.
Spray gun traps high water pressure, even when engine is
stopped and water is disconnected, which can cause injury.
• DO NOT allow children to operate the pressure washer.
• NEVER repair the high pressure hose. Replace it.
• NEVER repair leaking connections with sealant of any kind. Replace o-ring
or seal.
• NEVER connect high pressure hose to nozzle extension.
• Keep high pressure hose connected to pump and spray gun while system
is pressurized.
• ALWAYS point spray gun in safe direction and squeeze spray gun trigger
to release high pressure every time you stop engine.
• NEVER aim spray gun at people, animals, or plants.
• DO NOT leave spray gun unattended while machine is running.
• NEVER use a spray gun which does not have a trigger lock or trigger
guard in place and in working order.
• Always be certain spray gun, nozzles and accessories are correctly at-
tached before spraying water.
WARNING
Starter and other rotating parts can entangle hands,
hair, clothing, or accessories.
• NEVER operate pressure washer without protective housing or covers.
• DO NOT wear loose clothing, jewelry or anything that may be caught in
the starter or other rotating parts.
• Tie up long hair and remove jewelry.
12
SAFETY
WWW.BEPOWEREQUIPMENT.COM
SAFETY
WARNING
Unintentional sparking can result in fire or electric shock.
When Adjusting or Making Repairs to Your Pressure Washer
• Disconnect the spark plug wire from the spark plug and place the wire
where it cannot contact spark plug.
When Testing for Engine Spark
• Use approved spark plug tester.
• DO NOT check for spark with spark plug removed.
NOTICE
High pressure spray may damage fragile items including glass.
• DO NOT point spray gun at glass when using red 0° spray tip.
• NEVER aim spray gun at plants.
NOTICE
Improper treatment of pressure washer can damage it and shorten its life.
• If you have questions about intended use, contact your nearest authorized
dealer, call our support line, or visit our website.
• NEVER operate units with broken or missing parts, or without protective
housing or covers.
• DO NOT by-pass any safety device on this machine.
• DO NOT tamper with governed speed.
• DO NOT operate pressure washer above rated pressure.
• DO NOT modify pressure washer in any way.
• Before starting pressure washer in cold weather, check all parts of the
equipment to be sure ice has not formed.
• NEVER move machine by pulling on hoses. Use the handle provided on
unit's frame.
• Check fuel system for leaks or signs of deterioration, such as chafed or
spongy hose, loose or missing clamps, and damaged tank or cap.
Correct all defects before operating pressure washer.
WWW.BEPOWEREQUIPMENT.COM
13

Publicité

Chapitres

Table des Matières
loading

Produits Connexes pour BE 66DX40GG1

Table des Matières