Hama High-End Mode D'emploi page 20

Caution – Danger to life!
To prevent the risk of an electric shock, never open
the cover of the digital picture frame, casing or power
adapter components. There are no serviceable parts in
the digital picture frame or power supply.
Warranty/customer service
CAUTION! Any guarantee or warranty claims are
void if the device is opened by unauthorised persons
or service workshops. Please contact the specialist
dealer you purchased the device from if you find a fault
with your digital picture frame. Your dealer can quickly
deal with your customer service requirement without
problem. Service and repairs on your digital picture
frame must only be performed by authorised specialist
workshops.
Continual video loop settings:
In order to use the continual video loop function, some
settings on the picture frame have to be adjusted.
First, set the Setup menu so that the picture frame
begins showing videos when it is turned on
(Menu->Setting->"Film")
You also have to adjust the settings so that for videos
the directory is repeated. To do that, play a video and
then press the Enter key on the remote control.
A function menu will then appear on the screen.
On the far right, you have the option of choosing bet-
ween the following modes:
• Standard (does not repeat)
• Repeat one track
(the current video is continually repeated)
• Repeat directory (all videos in the directory are
repeated one after the other, and the whole
directory is then repeated afterward).
Note:
This function is only supported for firmware version
HA07 V 1.5-102 and higher.
If you have any inquiries, contact:
• Internet/World Wide Web
Product support, new drivers and product information
are available at www.hama.com.
• Support hotline - Hama Product Consulting
Tel.: +49(0)9091/502-115
Fax: +49(0)9091/502-272
E-mail: produktberatung@hama.de
21