Assembling The Squeegee; Upholstery Nozzle - SilverCrest SDR 1100 B2 Mode D'emploi

Extension nozzle
♦ Push the extension nozzle
The marking line on the extension nozzle
appliance must be aligned with each other (see fold-out page Figure A).
♦ Turn anticlockwise until both marking lines on the extension nozzle
aligned with both marking lines on the appliance. The extension nozzle
remains locked in this position (see fold-out page Figure B).
NOTE
► The fixture on the appliance has a joint so that the attachment can be
aligned to the best usage position. This is, however, not possible with the
extension nozzle
■ The extension nozzle

Assembling the squeegee

♦ Remove the upholstery nozzle
brackets onto the squeegee attachment
♦ Then press the upholstery nozzle
attachment

Upholstery nozzle

♦ Push the upholstery nozzle
The marking line on the upholstery nozzle
appliance must be aligned with each other (see fold-out page Figure A).
♦ Turn anticlockwise until both marking lines on the upholstery nozzle
aligned with both marking lines on the appliance. The upholstery nozzle
remains locked in this position (see fold-out page Figure B).
■ A fabric cover
be used for the cleaning of sensitive surfaces, such as sofas and armchairs.
NOTE
► The fixture on the appliance has a joint so that the attachment can be
aligned to the best usage position. This is, however, not possible with the
upholstery nozzle
■ The upholstery nozzle
■ 12 │ GB │ IE │ NI
on to the steam nozzle
10
.
10
is removed in the reverse order.
10
14
14
(see fold-out page).
13
on to the steam nozzle
14
is supplied for use with the upholstery nozzle
15
.
14
is removed in the reverse order.
14
6
and the marking line on the
10
and place this together with the two
.
13
under the mount of the squeegee
6
and the marking line on the
14
as far as the stop .
10 are
10
as far as the stop.
are
14
14
. This can
14
SDR 1100 B2