Accessories - Milwaukee 48-22-8547 Manuel De L'utilisateur

Removing the Drawers
1. Fully extend and empty the drawer.
2. Depending on the side, either lift or lower the
release lever on both sides so the slides can ride
over the stops. Pull out to remove.
Installing the Drawers
1. Pull the slides and slide carrier out until fully ex-
tended.
2. Hold the slide on the cabinet while aligning it with
the slide on the drawer.
3. Slightly insert one side and repeat for the other
side.
4. Slowly push the drawer until it is fully closed to
engage the slide.
5. Open and close the drawer to verify proper opera-
tion.
MAINTENANCE
To reduce the risk of injury, contact
WARNING
MILWAUKEE Corporate After Sales
Service Technical Support for ALL repairs and
replacement parts.
Maintaining the Chest/Cabinet
Keep your chest/cabinet in good repair by adopting a
regular maintenance program. Before use, examine
the general condition of your chest/cabinet. Check for
loose screws, misalignment, binding of wheels, bro-
ken parts and any other condition that may affect its
safe operation. Do not use a damaged chest/cabinet.
Maintaining the Casters
Grease the casters annually using high quality bear-
ing grease.
Grease
Points
Release Lever
Maintaining the Drawers
1. Periodically clean the drawers with a mild deter-
gent and water.
2. Remove grease and oil in drawer with a standard,
nonflammable cleaning fluid.
3. The use of drawer liners is recommended to
protect the finish inside the drawers and make
the drawers easier to clean. Drawer liners can be
cleaned with soap and water.
4. Lubricate the slides semi-annually with general
purpose grease or equivalent.
This steel product has been coated with industrial
powder coating for a durable finish. To help protect
the powder coated finish, do not allow harsh chemi-
cals (oil, grease or other chemical) to remain on the
powder coating surface. Use a glass cleaner to
clean and maintain all surfaces of powder coating.
Keep the chest/cabinet handles and wheels clean,
dry and free of oil or grease. Use only mild soap
and a damp cloth to clean your chest/cabinet since
certain cleaning agents and solvents are harm-
ful to plastics. Some of these include: gasoline,
turpentine, lacquer thinner, chlorinated cleaning
solvents, ammonia and household detergents
containing ammonia. Never use flammable or
combustible solvents around chests/cabinets.
For service and repair information, including the or-
dering of service parts, call our Corporate After Sales
Service Technical Support line at 1-800-SAWDUST,
or visit our website at www.milwaukeetool.com.

ACCESSORIES

Modifying the chest/cabinet to ac-
WARNING
cept other accessories may be
hazardous, resulting in injury or property dam-
age. Use only specifically recommended acces-
sories according to the manufacturer's instruc-
tions.
For a complete listing of accessories, go online to
www.milwaukeetool.com or contact a distributor.
6
Grease
Points
Cleaning
Service