Hardware Included - Milwaukee 48-22-8547 Manuel De L'utilisateur

ASSEMBLY
Be sure to follow the assembly in-
CAUTION
structions for the appropriate
chest/cabinet. Do not use power tools to as-
semble chest/cabinet. Tighten bolts with hand
wrenches.
Tools Required (Not Included)
Phillips Safety
screwdriver goggles

Hardware Included

NOTE: Items not shown in actual size. Hardware
lengths are approximate.
Hardware Item
AA
BB
CC
DD
EE
Item
5" Swivel caster
Chest corner extrusion
Cabinet corner extrusion
Cord storage bracket
NOTE: Begin product assembly close to the final
intended location of your chest/cabinet. This product
is heavy and may be difficult to move after assembly.
10 mm
Wrench
Description
Bolt M6 x 16L
Steel washer
Bolt M8 x 18L
Screw M4 x 12L
Screw M4 x 16L
Description
Side handle
with brake
5" Rigid caster
Bracket
Front bumper
Rear bumper
Attach the side handle to the rolling cabinet using
four bolts (AA) and a 10mm wrench. The side handle
can be attached to either side of the rolling cabinet,
but must match the end where the swivel casters
are installed.
NOTE: The holes in the cabinet are tapped and do
not require nuts.
13 mm
Wrench
Quantity
4
CAUTION
16
Do not overtighten the screws.
1. Ensure all cabinet drawers are securely locked into
16
place using the key lock on the rolling cabinet.
2. Lay the rolling cabinet on its back. Use the packag-
ing material to protect the finish.
20
3. Mount the two swivel casters with brake to the roll-
ing cabinet using four bolts (CC) and washers (BB)
per caster. The swivel casters with brake must be in-
20
stalled on the end of the cabinet with the side handle.
4. Mount the two rigid casters to the opposite end
Quantity of the rolling cabinet using four bolts (CC) and
washers (BB) per caster.
5. Tighten all bolts securely with a 13mm wrench.
1
6. Return the rolling cabinet to its upright position.
2
2
2
8
2
2
CC
2
Installing the Chest onto the Cabinet
CAUTION
4
1. Place the top chest on top of the rolling cabinet.
NOTE: The holes in the cabinet are tapped and
do not require nuts.
4
Attaching the Side Handle
Installing the Casters
Two people may be required to
complete installation.
BB
Two people may be required to
complete installation.
AA