Work Area Safety - Milwaukee 48-22-8547 Manuel De L'utilisateur

IMPORTANT SAFETY INSRUCTIONS
READ ALL SAFETY WARNINGS
WARNING
AND ALL INSTRUCTIONS. Failure
to follow the warnings and instructions may re-
sult in serious injury. Save all warnings and in-
structions for future reference.

WORK AREA SAFETY

•Use the chest/cabinet and accessories in accor-
dance with these instructions and in the manner
intended, taking into account the working conditions.
Use of the chest/cabinet for operations different from
those intended could result in a hazardous situation.
•Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
•Fully assemble the chest/cabinet according to the
assembly instructions. Do not leave off any pieces.
• Chest must be fastened by screws through
connectors after it has been placed on top of
cabinet.
•Do not modify the chest/cabinet in any way. Use
only specifically recommended accessories. Drilling
holes or modifying the chest/cabinet will lower the
load capacity, which can cause the chest/cabinet to
collapse, resulting in injury.
•Lock wheels when chest/cabinet is not being
moved. Unlocked wheels can allow the chest/cabi-
net to move unexpectedly.
•Keep the chest/cabinet on a level surface. Do not
load, unload, or park chest/cabinet on an incline.
The chest/cabinet may become unbalanced and tip,
resulting in injury.
•Always balance the chest/cabinet load to avoid
tipping. Unbalanced chests/cabinets are more likely
to tip when being moved or when using the chest/
cabinet work surfaces. Evenly distribute the weight
front to back and side to side. Place more than half
the total load weight on the bottom cabinet when pos-
sible. To help prevent the chest/cabinet from tipping,
load the product starting with the bottom drawers.
• Do not exceed the maximum product weight,
including contents. Do not exceed the maximum
weight for each drawer. Overloaded chests/cabinets
can tip, collapse, or damage drawer slides.
• Do not open more than one drawer at a time.
Chest/cabinet may tip, causing injury.
•Keep children and bystanders away while load-
ing, unloading, and moving chest/cabinet. Dis-
tractions can cause you to lose control.
•Only lift the chest/cabinet according to the
instructions in this manual. Never lift by the
side handle. Other methods may be dangerous,
resulting in injury.
• Only transport the chest/cabinet when empty.
Properly secure when transporting.
• Do not mount the chest/cabinet on a truck bed
or any other moving object.
• Lock both the lid and all drawers before rolling
the chest/cabinet. The drawers could come open
and make the chest/cabinet unstable and tip.
• Only roll the chest/cabinet short distances by
using the handle provided.
• Secure all items before rolling the chest/cabinet.
Loose items could shift, causing the chest/cabinet to
become unstable.
• Do not use drawers as steps. Do not stand on the
chest/cabinet. Chest/cabinet will tip, causing injury.
• Be careful when closing the chest top cover.
Remove hands before closing the top cover.
•Do not use chest/cabinet in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. This equipment has internal
arcing or sparking parts. Chest/cabinet should not
be located in a recessed area or below floor level.
•Chest/cabinet plugs must match the outlet.
Never modify the plug in any way. Do not use
any adapter plugs with earth (grounded) chest/
cabinet power strips. Unmodified plugs and match-
ing outlets will reduce risk of electric shock.
•Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
•Maintain chest/cabinet. Check for misalignment
or binding wheels, breakage or bending of drawer
slides or other parts and any other condition that
may affect the chest/cabinet's operation. Do not use
damaged chest/cabinet.
• Always use common sense and be cautious
when using tools. It is not possible to anticipate
every situation that could result in a dangerous out-
come. Do not use this tool if you do not understand
these operating instructions or you feel the work is
beyond your capability; contact Milwaukee Tool or
a trained professional for additional information or
training.
•Maintain labels and nameplates. These carry im-
portant information. If unreadable or missing, contact
a MILWAUKEE service facility for a free replacement.
•Have your chest/cabinet serviced by a qualified
repair person using only identical replacement
parts. Visit a local authorized service center for
repairs. Components, such as the power strip, are
not user replaceable. This will ensure that the safety
of the chest/cabinet is maintained.
GROUNDING
Improperly connecting the ground-
WARNING
ing wire can result in the risk of
electric shock. Check with a qualified electrician
if you are in doubt as to whether the outlet is
properly grounded. Do not modify the plug pro-
vided with the chest/cabinet. Never remove the
grounding prong from the plug. Do not use the
chest/cabinet if the cord or plug is damaged. If
damaged, have it repaired before use. If the plug
will not fit the outlet, have a proper outlet installed
by a qualified electrician.
Chests/Cabinets with Three Prong Plugs
Chests/cabinets marked "Grounding Required"
have a power strip with a three wire cord and three
prong grounding plug. The plug must be connected
to a properly grounded outlet (See Figure A). If the
power strip should electrically malfunction or break
down, grounding provides a low resistance path to
carry electricity away from the user, reducing the risk
of electric shock.
The grounding prong in the plug is connected through
the green wire inside the cord to the grounding sys-
tem in the power strip. The green wire in the cord
must be the only wire connected to the power strip's
grounding system and must never be attached to an
electrically "live" terminal.
Your power strip must be plugged into
an appropriate outlet, properly in-
stalled and grounded in accordance
with all codes and ordinances. The
plug and outlet should look like those
in Figure A.
2
Fig. A