Vestfrost ULTF 40 VTS098 Notice D'utilisation page 25

EN
How to change language:
1� Enter the SERVICE menu
2� Select LANGUAGE sub-menu
3� Push the ENTER key and the LANGUAG
menu is entered�
4� Push the SET key and then use the UP and
DOWN keys to select the language and
then the SET key to confirm it�
Data menu:
From the main view push the DATA key and
the DATA menu is entered�
See picture:
LOG: Enter the data logged by the controller�
EXPORT: Export the data to an USB pen drive
delivered with the appliance�
GRAPH: Enter the graph showing the tem-
perature logged the last 24h (with a logging
interval of 15min�)
How to enter the log:
1� Enter the DATA menu
2� Select LOG sub-menu
3� Push the ENTER key and the LOG menu is
entered�
4� By UP and DOWN keys chose the data
interval to display
5� Push the ENTER key to display the select-
ed data�
Vestfrost Solutions 25