Service Menu - Vestfrost ULTF 40 VTS098 Notice D'utilisation

24 Vestfrostsolutions�com

Service menu:

From the main view push the SERVICE key
and the SERVICE menu is entered�
See below picture:
PROBES:
Enter the probes, to see the measured tem-
peratures� 1-4 probes is availa ble depending
on model�
PARAMETERS:
Enter the setting of the parameters� Please
note that changes made to the parameters
should only be made of a technician�
SELF TEST:
Enter the Self Test program of the controller�
CLOCK:
Enter clock menu, where it is possible to
change date and time�
PASSWORD:
Enter the password menu, where it is possi-
ble to change the password�
LANGUAGE:Enter the language menu, where
it is possible to change language�
How to set time and date:
1� Enter the SERVICE menu
2� Select CLOCK sub-menu
3� Push the ENTER key��
4� Set the day by means of the UP and
DOWN keys�
5� Push the SET key, to confirm and pass to
the setting of time�
6� Use the same procedure as for the date�
7 � Then confirm the selection by means of
the SET key�
EN