Error Messages & Protections - STEAMAX PROCOLOR MIT TFV8 BIG BABY CLEAROMIZER Manuel D'utilisation

STEAMAX PROCOLOR – ERROR MESSAGES & PROTECTIONS
12-Second Safety Feature
If you press and hold the Fire button for more than 12 seconds, the current delivery will automatically switch off. Press the
Fire button once to continue vaping.
Overheating Protection ("TOO HOT!")
If this appears, the internal temperature of the battery carrier is too high. Please wait 30 seconds before continuing to vape.
Low Battery ("BATTERY LOW")
If the input voltage is too low, replace the batteries with new or charged 18650 cells.
Input Voltage too high ("HIGH INPUT")
If the input voltage is too high, the device cannot be operated. Please replace the battery with a new one that meets the
requirements stipulated here.
No Atomizer Head detected ("NO ATOMIZER")
The device could not detect a atomizer head. Please install a atomizer head or check that it is properly connected.
New Atomizer Head ("NEW COIL?")
A (new) atomizer head was detected in temperature mode (TC).
88
www.steamax.com