STEAMAX PROCOLOR MIT TFV8 BIG BABY CLEAROMIZER Manuel D'utilisation page 75

STEAMAX TFV8 BIG BABY – COMMISSIONING OF THE DEVICE
Changing the Atomizer Head
1. Remove the TFV8 Big Baby clearomizer from the battery of your e-cigarette.
2. Screw the head base counterclockwise from the glass tank, while the mouthpiece
points to the ground.
3. Remove the old atomizer head and insert a new one. Please first drip a few drops of
e-liquid directly into the wick of the coil to make it fully saturated before first use.
4. Connect all parts again and screw the clearomizer back to the battery / box mod.
Make sure that no e-liquid can overflow and / or leak.
Please note the following: Prior to first use, drip a few drops of your e-liquid on the atomizer head and let it sit before vaping.
Please take several puffs without activating the atomizer and leave the atomizer head sit for 15 minutes in the e-liquid filled tank
before use. Don't clean atomizer heads with water. Because atomizer coils are wearing parts, they must be changed regularly.
www.steamax.com
73