Menu Selection - STEAMAX PROCOLOR MIT TFV8 BIG BABY CLEAROMIZER Manuel D'utilisation

STEAMAX PROCOLOR – SELECTING & OPERATING THE MENUS

Menu Selection

1. Press the Fire button rapidly 5 times within 2 seconds to switch on the device. The display shows
„PROCOLOR". The device is now switched on.
2. Press the fire button 3 times in quick succession with the device switched on to access the menu.
Briefly press the fire button to navigate to the menu in which you want to adjust your settings.
Menu 1 – Setting of the Operating Mode
If you select menu 1, you will see data about the steam setting currently in use. Use the „UP" or „DOWN" key
to navigate to the operating mode you want to use. By pressing and holding the fire button, you will reach the
lower levels of the menu, where you can also make your settings with the „UP" and „DOWN" buttons.
www.steamax.com
81