STEAMAX PROCOLOR MIT TFV8 BIG BABY CLEAROMIZER Manuel D'utilisation page 73

STEAMAX PROCOLOR – COMMISSIONING OF THE DEVICE
Power On | Locking and Unlocking the Device (LOCK / UNLOCK)
Press the fire button 5 times in quick succession (within 2 seconds) when the unit it switched off to turn on
the unit.Locking (LOCK) and unlocking (UNLOCK) of all buttons works the same way with the device switched
on by pressing the fire button 5 times in quick succession. Hold down the space bar for 5 seconds while the
device is locked to completely shut down the system. We recommend that you turn your e-cigarette off during
transport and when the device is not being used for longer periods of time.
Quick Functions when the Device is switched on (UNLOCK)
1. Briefly press the fire button and the „AB" button simultaneously to switch between modes „W"
(variable watts mode), „Ti" / „Ni" / „SS" (variable temperature modes), and „M" (Memory mode).
2. Briefly press the fire button and the „UP" button at the same time to switch between the „NORM", „SOFT"
and „HARD" preheat effects in Watts or Memory mode, or the wattage range between 6 to 225 watts in
the temperature mode.
3. Briefly press the „UP" and „DOWN" setting buttons simultaneously to lock the device (LOCK) or to unlock
it (UNLOCK).
www.steamax.com
71