Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5
Installing Cherry Tools software
You can configure the keyboard virtually and/or
physically.
In virtual programming, the configuration is saved in a
file. In physical programming, the configuration is
written to the keyboard. It is still stored in the
keyboard even after the USB connector is removed.
The programming is written in the direct help of the
Cherry Tools software.
1 Place the Cherry CD in your CD-ROM drive.
The CD-ROM starts automatically. The installation
begins.
2 If the CD-ROM does not start automatically, double-
click the CD-ROM drive in Windows Explorer and
then the Start.exe start file.
3 Follow the installation instructions on the screen.
6
Tips
6.1 RSI syndrome
RSI syndrome
RSI stands for "Repetitive Strain Injury". RSI arises
due to small movements continuously repeated over a
long period of time.
Typical symptoms are discomfort in the fingers or
neck. For further information see: www.cherry.de/
english/service/servicedownload_rsi.htm
1 Set up your workspace ergonomically.
2 Position the keyboard and mouse in such a man-
ner that your upper arms and wrists are out-
stretched and to the sides of your body.
3 Take several short breaks, with stretching exer-
cises if necessary.
4 Change your posture often.
6.2 Disposal
Dispose of the old unit via a collec-
ting point for electronic scrap or via
your dealer.
7
Contact
ZF Electronics GmbH
Cherrystraße
91275 Auerbach
Germany
www.cherrycorp.com
www.cherry.de
E-mail: info@cherry.de
Telephone:
Sales: +49 (0) 180 5 243779* (0180 5 CHERRY*)
Technical support: +49 (0) 180 5 919108*
(*14 euro cent/min. from German landlines, prices
may vary for calls made from mobile networks.)
Please have the following information on hand when
contacting technical support:
•
Item and serial no. of the product
•
Name and manufacturer of your system
•
Operating system and, if applicable, installed
service pack version
8
General advice
Cherry, a brand of ZF Electronics GmbH, continuously
optimizes its products as new technologies are
developed. For this reason we reserve the right to
make technical alterations. The evaluation of product
reliability and the definition of the product's technical
performance are carried out according to our own
requirements in order to meet internationally
recognized regulations and standards. Requirements
in addition to these can be met through mutual
cooperation. Improper usage, handling, storage and
external influences could lead to faults and defects
during use.
We do not accept warranty for defects caused by
alterations to our product by the user and shall not be
held liable for unauthorized modifications. All repairs
must be made by us or an officially appointed
organization or person.
Possible compensation claims against
ZF Electronics GmbH or its nominated officers –
whatever the legal justification including physical or
stress related injuries – are excluded. Exceptions to
this exist in the case of intent or gross negligence on
the part of ZF Electronics GmbH, infringements of
Product Liability Law or in cases of injury, bodily harm
or risk to health. These operating instructions only
apply to the accompanying product.
Full details can be obtained from your distributor or
direct from us.
3
Publicité
Table des Matières
