Cleaning The Device; General Advice - Cherry G84-4700 Mode D'emploi

4 Restoring the keypad to its delivery
status
 Press and hold down the keys in the appropriate
sequence: Num, Minus and Enter.
The keypad is restored to its delivery status.
However, the configuration of the decimal separator
characters in mode 2 is retained.
5

Cleaning the device

Caution!
Damage may be caused by harsh cleaning agents or
liquids in the device
1 Do not use solutions such as gasoline or alcohol
and scouring agents or scouring foam for cleaning.
2 Avoid allowing fluids to enter the device.
1 Moisten a soft cloth with a mild cleaning agent
(e.g. dishwashing liquid).
2 Remove soiling from the surface of the device.
3 Remove any cleaning agent residue with a water-
moistened cloth.
4 Dry off the device with a soft, lint-free cloth.
6 Disposal
Dispose of the old unit via a collecting
point for electronic scrap or via your
dealer.
7 Contact
ZF Friedrichshafen AG
Electronic Systems
Cherrystraße
91275 Auerbach
Germany
www.cherry.de
E-mail: info@cherry.de
Telephone:
Sales: +49 (0) 180 5 243779* (0180 5 CHERRY*)
Technical support: +49 (0) 180 5 919108*
(*14 euro cent/min. from German landlines, prices
may vary for calls made from mobile networks.)
4
Please have the following information on hand when
contacting technical support:
• Item and serial no. of the product
• Name and manufacturer of your system
• Operating system and, if applicable, installed
service pack version
8

General advice

CHERRY, a brand of ZF Friedrichshafen AG,
continuously optimizes its products as new
technologies are developed. For this reason we
reserve the right to make technical alterations. The
evaluation of product reliability and the definition of
the product's technical performance are carried out
according to our own requirements in order to meet
internationally recognized regulations and standards.
Requirements in addition to these can be met through
mutual cooperation. Improper usage, handling,
storage and external influences could lead to faults
and defects during use.
We do not accept warranty for defects caused by
alterations to our product by the user and shall not be
held liable for unauthorized modifications. All repairs
must be made by us or an officially appointed
organization or person.
Possible compensation claims against
ZF Friedrichshafen AG or its nominated officers –
whatever the legal justification including physical or
stress related injuries – are excluded. Exceptions to
this exist in the case of intent or gross negligence on
the part of ZF Friedrichshafen AG, infringements of
Product Liability Law or in cases of injury, bodily harm
or risk to health. These operating instructions only
apply to the accompanying product.
Full details can be obtained from your distributor or
direct from us.