Intended Use; Technical Specifications; Package Contents; Safety Instructions - SilverCrest SHK 360 A1 Consignes D'utilisation Et De Sécurité

Introduction / Safety instructions
z Intended use
This appliance does not require special
„ „
assembly.
The air inlets and outlets of the appliance
„ „
must never be covered or obstructed!
The appliance should be used on a
„ „
horizontal floor! It is forbidden to mount
this appliance on to a wall or ceiling!
The appliance should never be placed
„ „
below plug sockets.
The heater is not intended for the
„ „
bathroom.
The appliance must only be used in
„ „
closed, dry rooms as additional heating.
z Technical specifications
Model
AC adapter
Heat output
Thermostat
control
Protection class II
Appliance di-
mensions
approx.
z Package contents
After unpacking the product, please check
that the appliance is in perfect condition.
Do not use the product if it is defective.
Fan heater
„ „
Original operating instructions
„ „
24 GB/IE/NI
SHK 360 A1
220V – 240 V~ 50/60 Hz
1500 W
Infinitely variable
22.8 x 22 x 36.5 cm
On/Off button
(I means ON/O means OFF)
Standby button
Standby (function) indicator light
Fan indicator light
Thermostat turn-switch
Indicator light for heat level 1
Indicator light for heat level 2
Button for heat level 2
Button for heat level 1
Fan switch
Mains plug
Carrying handle
Standbysymbol
Fansymbol
Symbol heat level 1 (750 W)
Symbol heat level 2 (1500 W)
z Safety instructions
In order to prevent
the heater from over-
heating, the heater must not
be covered – Fire hazard!
Please observe the information
on the appliance.
Prior to commissioning, please
„ „
read the operating instructions
of your fan heater carefully to
be able to ensure correct use.
Never switch the appliance on
„ „
or off at the plug, only do so
at the power switch.