How To Remove The Display From The Installation Mount - Panasonic TY-VK55LV1 Instructions D'installation

How to remove the display from the installation mount

① Push the lock lever to unlock. Then pull out
the unit mount plate.
② Insert the hexagonal wrench Ⓔ and lock the
unit mount plate so that it does not move.
③ Remove the main unit fi xing screws Ⓓ fastening
the main unit and installation mount (one screw
on each side).
④ Holding the bottom of the main unit, lift it up and
towards you to release the hooks of the upper
and lower mount brackets Ⓕ . Then lift up and
off.
Vertical shift
Adjustment
Horizontal shift
range
Tilt angle
External dimensions
Weight
TY-VK55LV1
±7 (0.28) [level],
±4.5 (0.18) individually per side [total ±11.5 (0.45)]
Width: 1215 (47.9)
Height: 686 (27.0)
Depth: 184 (7.3) to 384 (15.2)
21 kg (46.3 lbs)
③Ⓓ Main unit fi xing
screws
④
Mount surface
Unit : mm (inches)
TY-VK47LV1
±9.5 (0.37)
±1.5°
Width: 1045 (41.2)
Height: 590 (23.3)
Depth: 184 (7.3) to 384 (15.2)
20 kg (44.1 lbs)
33