Appliance Description; Operating The Hob With The Sensor Keys - Erge KHT 30-2 Instructions De Montage Et D'utilisation

2. Appliance description

3 4 6
The decorative design may deviate from the illustrations.
1. ON/OFF key
2. Cooking zone selection key back
3. Cooking zone selection key front
4. Power setting display
5. Plus key (raise) / Minus key (lower)
6. Timer key
7. Timer indication
8. Stand-by dot for the automatic switch-off device
Appliance description
5
8 2
7 1

2.1 Operating the hob with the sensor keys

The glass ceramic hob is operated with touch control sen-
sor keys. The sensor keys are operated as follows: lightly
touch a symbol on the surface of the ceramic glass plate. A
buzzer will indicate when the controls have been operated
correctly. The touch control sensor key will then be indica-
ted as "key".
ON/OFF key (1)
This key is used to switch the entire hob on and off . It is,
as it were, the main switch.
Cooking zone selection key (2) (3)
Pressing one of the cooking zone selection keys available
will select a cooking zone, for which the Plus key or the
Minus key may be used to set the power level.
To activate other heating circuits.
Power setting display
The power setting indicator shows the power setting which
has been selected, or:
........................... Residual heat
........................... Automatic boost function
............................ Timer
............................ Lock/ child safety device
Minus key / Plus key (5)
These keys are used to set the cooking levels or the auto-
matic switch-off device. The Minus key reduces the setting
and the Plus key raises it. The setting can be deleted by
pressing both keys simultaneously.
Timer key (6)
For programming the automatic switch-off device.
(4)
GB
19