IWC Schaffhausen PILOT'S WATCH TIMEZONER SPITFIRE Mode D'emploi page 24

— 2 4 —
– Push the crown back into position 0 to start the movement and, in doing so, the seconds hand.
Push the crown into position X and secure it by turning it to the right at the same time.
THE FUNCTION OF THE ROTATING BEZEL /DISPL AYING OTHER TIME ZONES
The rotating bezel allows you to quickly and conveniently change your watch to a different time zone.
To move the rotating bezel, push it down evenly (and completely) and turn it in the desired direction
at the same time.
As a rule, the rotating bezel must be turned clockwise when travelling east and in the opposite direc-
tion when travelling west.
Turn the rotating bezel until the desired time zone is at "12 o'clock" (above the triangle on the dial). If
it is summer time in the time zone in question, you must set the corresponding dot with the letter "S"
to the "12 o'clock" position.
Ensure that the rotating bezel noticeably clicks into the selected position.
After moving the rotating bezel, please ensure that the 24-hour display and the date are set correctly –
especially if you cross the International Date Line during your journey.
PILOT'S WATCH TIMEZONER SPITFIRE