First Switching-On; Use Of The Machine; Machine Statuses; Manual Switching-On - Saeco IDEA CAP002A Mode D'emploi Et D'entretien

11 - FIRST SWITCHING-ON

- Fill the hopper (6 and 29) with the selected coffee beans
blend.
Be sure the coffee does not contain foreign bodies
which could be dangerous for grinders.
- Check if the removable components (13 and 16) are in
the right position and if the door (15) is closed.
If they are not, when the machine is switched-on, the
display will indicate which component is in the wrong
position.
- Turn the all-pole switch on "I".
- Switch on the machine through the switch (18);
the message "WARMING UP" will be displayed.
- When the message "READY FOR USE" is displayed:
- Adjust the brew group (22) to obtain the suitable height
depending on the container used (Pr. 8.4).
- Place one or two containers under the brew group.
- Select the beverage and press the corresponding button.
Although buttons are previously programmed on a stan-
dard base, check your beverage has the selected featu-
res. If not, they must be reprogrammed (Pr. 12.6).

12 - USE OF THE MACHINE

The Duo version is equipped with 2 coffee bean
hoppers and 2 coffee grinders. This allows you to
double the products that can be dispensed or insert
a different product quality.
Press the A button to select a container. When the B
indicator light turns on the container is ready for use.
Read carefully this brochure until you get a good
understanding of the machine, before starting to
operate it.
After a long time of machine inactivity, read the
previous paragraph "First switching-on" before re-
operating the machine.
12.1

Machine statuses

With regard to the power supply, the machine can have
the following statuses:
Off and electrically insulated
- Main switch (18) and all-pole switch on the "0" position
(or plug disconnected).
- Only the memory for the programmed data storing is
enabled.
On
- Main switch (18) and all-pole switch on the "I" position
(or plug connected).
- All the functions are enabled and the display (8a) is
on.
In standby mode (machine switched off but not elec-
trically insulated):
- Main switch (18) is on "I" position.
- The following functions are enabled: "AUTOM.
SWITCHING-ON", "ANTI-FREEZING", if selected, and
"CLOCK", as well as the display and the memory for
the programmed data storing.
- The display's backlight is off.
12.2

Manual switching-on

This switching-on is necessary when the machine is in the
"off and electrically insulated" status (Pr. 12.1). Proceed
as explained is Pr. 11 excluding, in case, the beverage
brewing check.
12.3 Programmed automatic
switching-on
The machine has to be on "STANDBY" and the function
"AUTOM. SWITCHING-ON" has to be enabled.
The machine will automatically switch-on at the program-
med time.
12.4 Stand-by temporary
switching-on
Manual switching-on when the machine on "STANDBY".
Press and hold the button
The machine will automatically return on "STANDBY", 60
minutes after the last operation.
English
for 3 seconds.
167