Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5 ASSEMBLY
20
–
Remove locking cap
–
Push in seal ring retainer
–
Remove lock ring
Info
Do not scratch the inside surface.
501147-01
Assembling the damper
–
Mount pilot bushing
ring groove.
The groove faces upward.
–
Mount lock ring
Info
Do not scratch the inside surface.
501148-01
–
Pull out the piston rod until the seal ring retainer is flush
with the pilot bushing.
–
Mount locking cap
–
Fill the damper with nitrogen (see repair manual).
–
Mount protection cap
501150-01
Installing the spring
–
Mount adjusting ring
all the way down.
501152-01
–
Measure the total spring length while the spring is not
under tension.
–
Position the spring.
Guideline
–
Mount spring retainer
501151-01
fp
.
fq
.
fr
.
3
(included) and slide it under the
fr
.
fp
.
fn
of the reservoir.
fs
ft
with retaining ring
4
(included).
and screw
Publicité
Table des Matières
