KTM 45412955044S Manuel De Montage page 45

5.2 Assembling the shock absorber
Guideline
Special socket (T14084)
–
Lubricate O-ring
Lubricant (T158) (
–
Push the outside fork tube upward.
–
Clamp the outside fork tube in the area of the lower triple
clamp.
Clamping stand (T1403S)
–
Mount and tighten screw cap
501143-01
Guideline
Special socket (T14084)
Final steps
–
Install the fork legs (see Owner's Manual).
–
Install the front wheel (see Owner's Manual).
–
Remove the motorcycle from the lift stand (see Owner's
Manual).
Preliminary work
–
Raise the motorcycle with a lift stand (see Owner's Manual).
–
Remove the shock absorber (see Owner's Manual).
–
Remove the spring (see repair manual).
Disassembling the damper
–
Make a note of the present state of rebound
pression damping
–
Open the adjusters of the rebound and compression dam-
ping completely.
501145-01
–
Remove protection cap
–
Slowly open screw
The nitrogen pressure dissipates.
501146-01
fk
on the screw cover.
p. 22)
bp
.
fl
fm
.
fn
of the reservoir.
fo
.
ASSEMBLY 5
and com-
19