GE KITCHEN HUB UVH1301 Manuel D'utilisation Et Instructions D'installation page 24

B. RECIRCULATING
B4
MOUNT THE KITCHEN HUB™
(Cont.)
through outer top cabinet holes. Turn two full
turns on each screw.
Cabinet Front
Cabinet Bottom Shelf
Unit Top
4. Tighten the two screws to the top of the unit.
(While tightening screws, hold the unit in place
against the wall and the top cabinet.)
24
Installation Instructions
(Non-Vented Ductless) (Cont.)
Filler Block
This
Equivalent distance
to Depth can NOT
of Cabinet exceed 2"
Recess to ensure
proper
installation
Self-Aligning Screw
B5
FILTERS
1. Remove grease filter and install a charcoal filter
on each side of the motor as shown below.
B6
FINALIZE INSTALLATION
Plug in the unit.
Charcoal
Filter Mount
49-2000492 Rev. 2