Deleting The Encryption Key (Aes/ Des (Scm) Only); Password Protection - Kenwood NX-5700 Mode D'emploi

DELETING THE ENCRYPTION KEY (AES/ DES (SCM) only)

1
Press the key programmed as [Key Delete] to enter Key Delete Mode.
Alternatively, press the key programmed as [Menu] to enter Key Delete Mode using the
Menu Mode.
2
Select the current Encryption key using the [J] and [K] keys.
3
Press the [
4
Press the [ ] key to confirm and exit Key Delete Mode.
Note:
To delete all Encryption keys (when more than one key has been set up), press and hold
●
the [ ] key for 1 second.

PASSWORD PROTECTION

If the transceiver is password protected, entering an incorrect password successively
15 times will automatically delete all the Encryption keys.
Turning the transceiver power OFF and the ON again will not reset the number of attempts
●
for entering an incorrect password.
36
] key to delete the Encryption key.