Kenwood NX-5700 Mode D'emploi page 21

Bluetooth Device
o
Activates Bluetooth Device mode.
Bluetooth Speaker <BtSpkr>
o
Allows you to switch the speaker from the transceiver's built-in speaker to the speaker
of a connected Bluetooth device.
Broadcast <B.Cast>
o
Allows you to make a Broadcast Group Call. Switches between Broadcast Group
Call and Conference Group Call when Broadcast Group Call is enabled.
Call 1 ~ 6 <Call1 ~ Call6>
o
Press this key to send a message or initiate a call.
Call Response <CalRes>
o
Press this key to respond to an Individual Call. When an Individual Call is received,
the Alert tone stops.
Channel Down <CH－>
o
Press this key to decrease the channel number. {p. 4}
Channel Entry <CH_Ent>
o
Press this key to enter Channel Entry Mode, to select a channel.
Channel Recall <CH_Rcl>
o
Press this key during Scan to return to the last called zone and channel.
Channel Up <CH+>
o
Press this key to increase the channel number. {p. 4}
Clear <Clear>
o
Press this key to end a call or cancel a data transmission.
Clock <Clock>
o
Refer to "CLOCK" {p. 38} .
Clock Adjustment <ClkAdj>
o
Allows you to set the clock. Refer to "CLOCK" {p. 38} .
Color Scheme
o
Allows you to change the color scheme of the LCD. Refer to "COLOR
SCHEME" {p. 39} .
CW Message <CW_Msg>
o
Press this key to send the CW message.
21