Kenwood NX-5700 Mode D'emploi page 6

2
Press the [J] and [K] keys to select a Talkgroup ID from the list that has been
pre-entered into your transceiver.
3
Press the [ ] key to confirm the Talkgroup ID.
The LCD display will return to the zone and channel screen after the Talkgroup ID is
●
confirmed.
4
Press and hold the PTT switch to make the call.
Speak into the transceiver as you would during a normal call.
●
Making Individual Calls (P25 Conventional)
o
You can make calls to specific persons on a Conventional channel.
1
Press the key programmed as [Individual], [Individual + Status] or [Individual
+ Short Message] to enter Individual Call Mode.
Alternatively, press the key programmed as [Menu] to enter Individual Call Mode using
the Menu Mode.
The Individual ID List appears on the display.
●
2
Press the [J] and [K] keys to select a unit ID from the list that has been pre-
entered into your transceiver.
Alternatively, you can enter a unit ID manually.
Press the [
●
the code. On an optional microphone with keypad, you can enter the code directly.
Press the [ ] key to confirm the code after entering the code.
To delete the code entered, press the [
the [ ] key to delete all digits.
6
] key to enter the manual input mode. Press the [J] and [K] keys to enter
] key to delete one digit, or press and hold