Kenwood NX-5700 Mode D'emploi page 44

2
Press the [ ] key to connect.
3
Press the [ ] key to start pairing.
Alternatively, you can pressed the key programmed as [Bluetooth Connect/
Disconnect].
The LED indicator blinks in blue.
●
For Bluetooth devices that does not support Simple Secure Pairing, you need to enter
●
a Personal Identification Number (PIN) code. You need to operate the Bluetooth
headset to proceed with pairing.
When pairing is complete, your transceiver will connect to the Bluetooth headset. When
the connection is established, you can perform hands-free call.
The " " indicator appears on the display.
●
44