Making Ice Cubes; After Cleaning - Sharp SJ-XG640M Mode D'emploi

In-door ice maker (SJ-XG740G,SJ-XG740M)

Making ice cubes

1) Use the water cup to measure amount of water.
Water cup (160mL)
2) Pour water into In-door ice maker by the water cup.
3) When ice cubes are made, turn the lever clockwise to
put the ice into the ice cube box.
4) Pull the ice cube box to take out the ice cubes.
Ice cube box
Note
• To prevent the ice cube box from being damaged, do
not pour oil into it or make ice in it.
• Do not open the freezer door as much as possible
during ice making.
Movable ice maker (SJ-XG640M, SJ-XG690G, SJ-XG690M)
It is highly recommended to use the ice maker as shown in the picture of "Description" .You can put the ice maker
anywhere in the freezer compartment.
1) Do not overfill the tray with
water. Otherwise the ice
cubes will join together when
frozen.
2) When ice cubes are made,
turn the lever clockwise to
put the ice into the ice cube
box.
Water level
Lever
Lever
Ice cube box
Cleaning In-door ice maker
• Empty the ice cube box in advance.
1) Pull upward the In-door ice maker to remove.
2) Remove ice cube tray.
3) Remove ice cube box.
4) Push the protrusion to disassemble In-door ice maker.
Ice cube tray
3)
Note
• Do not put the ice cube tray in a dishwasher.
Otherwise, the packings are damaged.

After cleaning

1) Assemble the In-door ice maker.
(Reverse procedure to disassemble.)
2) Install the In-door ice maker securely.
In-door ice maker
Hook
Door
<Position of the lever>
Lever
Note
• Make sure to place the ice maker flatly not to spill out
the water from the ice tray.
• To prevent the ice cube box from being damaged, do
not pour oil into it or make ice in it.
2)
Protrusion
Hole
Lever
EN-4
EN