Sharp SJ-XG640M Mode D'emploi page 12

Controlling temperature
The refrigerator controls its temperature automatically. However, you can adjust the temperature as below.
How to check the current temperature setting
The indicator lights up to show the current temperature
level by pressing "F" or "R" button.
Freezer compartment
Refrigerator compartment : Press "R" button.
Setting of Freezer/Refrigerator compartment
Freezer compartment
1.
Press "F" button.
2.
Press "F" button to change the temperature level.
Refrigerator compartment
1.
Press "R" button.
2.
Press "R" button to change the temperature level.
Advanced setting of Freezer/Refrigerator compart-
ment
The temperature of freezer compartment and refrigerator
compartment can be adjusted in 9 levels (level 1 ~ 9) by following
the steps a to b.
Freezer compartment
a.
Press "F" button first.
Hold down "F" button and then press "Express freezing" button
for 3 seconds or more.
(Beep, beep, beep)
The indicator returns to "Default
setting".
b.
Press "F" button to change the temperature level.
Follow the steps a to b if you want to adjust the temperature in 5
levels.
Refrigerator compartment
a.
Press "R" button first.
Hold down "R" button and then press "Express freezing" button
for 3 seconds or more.
(Beep, beep,beep)
The indicator returns to "Default
setting".
b.
Press "R" button to change the temperature level.
Follow the steps a to b if you want to adjust the temperature in 5
levels.
EN-9
: Press "F" button.
• Temperature indicator changes as the picture below
(3→4→5→1→2→3) by pressing "F" or "R" button.
Level
Level
1
2
3
Default setting
Default setting
4
5
Note
After adjusting the temperature level, the indicator turns
off approximately 5 seconds later.
• Temperature indicator changes as the picture
below (5→6→7→8→9→1→2→3→4→5) by
pressing "F" or "R" button.
...
OFF
Level
Level
1
2
3
4
5
Default setting
Default setting
6
7
8
9
Indicator
Indicator
...
...
Lighting Flashing
Indicator
Indicator