Using The Child Lock; Timer - Samsung NZ24T4360RK Manuel D'utilisation

Operations

Using the child lock

To prevent a child from activating the cooking surface of the cooktop, the Child
Lock function can be used. It also prevents unintended setting changes while
cleaning the surface with a cloth by locking all buttons on the control panel except
for the Power button.
Switching the child safety lock On/Off
NOTE
• If you activate the child lock while the cooktop is operating, touch the Power
button to turn the cooktop off for safety reasons.
• If the child lock is enabled when the cooktop is not operating, all buttons will
be disabled including the Power button.
18 English
OM_NZ24T4360RK_EN.indd 18
1. Touch the Child lock ( ) button for
approximately 3 seconds. An acoustic
signal will sound as confirmation.
2. Touch any control button.
will appear in the indicator,
indicating the child lock has been
activated.
3. To switch the child lock off, touch
the Child lock ( ) button again for
3 seconds. An acoustic signal will sound
as confirmation.

Timer

1. Press the Timer button. The number
2. Touch the
You can use the Heat level / Time selector
to set the time.
The Heat level / Time selector is divided
from 0 to 9, and you can touch it to select
the number. (The figure shows how to set
2 1
95 minutes.)
Touch the Heat level / Time selector once
to select the tens digit of the time, and then
touch again to select the unit digit of the
time.
10 will be displayed above the timer
indicator.
or buttons to set the
time. Then, press the Timer button
again.
NOTE
2020-06-19 4:14:34