Control Panel
01
02
03
06
01 Power
02 Child Lock (
04 Cooking zone
05 Heat level and
selectors
residual heat
indicator
07 Heat level / Time
08 Timer
selector
OM_NZ24T4360RK_EN.indd 15
04
05
07
08
03 Pause
)
06 Pan size selector
Residual heat indicator
When an individual cooking zone or the cooktop is turned off, the presence
of residual heat is shown with an
(for "hot") in the digital display of the
appropriate cooking zone. The residual heat indicator goes out only after the
cooking zone has cooled.
You can use the residual heat to thaw food or keep food warm.
WARNING
As long as the residual heat indicator is illuminated, there is a risk of burns.
WARNING
If the power supply is interrupted, the
about residual heat will no longer be available.
However, you may still be able to burn yourself. This can be avoided by always
taking care when near the cooktop.
Cooking areas
•
The cooking areas on your cooktop are identified by permanent circles on the
glass cooking surface. For the most efficient cooking, fit the pan size to the
element size.
•
Pans should not extend more than ½˝ to 1˝ beyond the cooking area.
•
When a control is turned on, you can see a glow through the glass cooking
surface. The element will cycle on and off to maintain the preset heat setting,
even at high settings.
•
For more information on selecting proper types of cookware, refer to the
section "Using the proper cookware".
Initial cleaning
Wipe the ceramic glass surface with a damp cloth and ceramic cooktop glass
cleaner.
WARNING
Do not use caustic or abrasive cleaners. The surface could be damaged.
symbol will go out and information
English 15
2020-06-19
4:14:33