EIBENSTOCK ETR 350 P Notice Originale page 18

Specifications
Cutting system ETR 350 P
Rated voltage:
Power input:
Order Number:
Frequency:
Load speed:
Max. disc diameter:
Spindle connection:
Protection class:
Degree of protection:
Net weight:
Interference suppression:
Available accesories:
Diamond cutting disc Premium Ø350mm
Diamond cutting disc cut close to the edge Ø350mm
Adapter for cut close to the edge
Cut depth adjustment and limiting
Guide rail set 200 cm
Guide rail 100 cm, including rail connector
Industrial Vacuum Cleaner DSS 35 M iP
Content of Delivery
ETR 350 P with diamond cutting disc, tool kit and operating instructions in a
carton.
Application for Indented Purpose
The ETR 350 P cutting systems is intended for professional use.
With the fitted suction hood
cutting wheel, it is designed for dry cutting concrete, stone and masonry with a
minimum of dust.
Only in conjunction with the diamond cutting discs developed especially
for the cutting systemsw (refer to Accessories) can an optimal work
progress be guaranteed.
Use only diamond cutting discs recommended by the manufacturer.
During wet cutting, the diamond cutting disc must be cooled with water from the
available water supply. During dry cutting, vacuum removal of the dust
(category M) is absolutely essential.
50 - 60 Hz
2200 min
350 mm
Ø 25,4 mm
II
IP 20
ca. 12,9 kg
EN 55014 and EN 61000
water connection as well as the correct diamond
or
18
230 V ~
2700 W
06818000
-1
Ordernumber:
3744G000
3744H000
3744K000
3744L000
3744N000
3744P000
09919000