Product Features - Harvia sentiotec MiniMy 120 Basic Instructions De Montage Et Mode D'emploi

Cabine infrarouge 120 x 130 x 202 cm
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Instructions for installation and use

3.2. Product features

Infrared cabin
Cabin made of solid spruce wood for the infrared radiation of one person.
Pitch pockets are not grounds for return, since they can always appear in
spruce wood and the depth at which they lie cannot be detected during
the sorting-out process.
If these are just under the surface, heat can cause them to soften and
"bleed".
The leaking pitch can be removed with a rag soaked in acetone. If only
droplets of pitch occur, allow these to harden and then carefully scrape
them off with a knife.
Infrared control unit wave.com4 Infra
Control unit for the dimming of two heating circuits (each with a maximum of 1.5 kW)
and for dimming the light and an optional fan.
This control unit only supports the "intensity regulation" operating mode.
p. 7/40
EN

Publicité

Table des Matières
loading

Table des Matières