Console (config-if)# spanning-tree port-priority 96
Console (config-if)# spanning-tree portfast
Console (config-if)# exit
Console (config)# exit
Console# show spanning-tree ethernet g1
Interface
Port ID (ID port)
Name (Nom)
Prio.Nbr (N° prio)
--------
-------
g1
128.1
Spanning tree enabled
Type: point-to- point (configured
: auto)
Port Fast: no (configured: no)
Définition des paramètres des LAG STP
La page
STP LAG
Settings (Paramètres des LAG STP) permet d'affecter des paramètres d'agrégation de ports STP. Pour ouvrir la page STP LAG Settings
(Paramètres des LAG STP), cliquez sur Switch (Commutateur)→ Spanning Tree→ LAG Settings (Paramètres des LAG) dans l'arborescence.
Figure 7-22. Paramètres des LAG STP
Designated (Désigné)
Cost (Coût)
Sts (État)
Cost Bridge ID (ID pont coût)
---
--
--------------------
19
FWD
38 32768 0030.9441.62c1
Port ID (ID port)
Prio.Nbr (N° prio)
------
128.25