Electrical Safety - Bosch GLM 30 Consignes D'utilisation/De Sécurité

such as, but not limited to,
telescopes or transits to view
the laser beam. Serious eye
injury could result.
ALWAYS remove the
batteries when cleaning the
laser light aperture to laser
lens.
DO NOT operate the
measuring tool around
children or allow children to
operate the measuring tool.
Serious eye injury could result.
ALWAYS turn the measuring
tool "OFF" when not in use.
Leaving the measuring tool "ON"
increases the risk of someone
inadvertently staring into the
laser beam.
DO NOT operate the
measuring tool in
combustible areas such as
in the presence of flammable
liquids, gases or dust.
ALWAYS position the
measuring tool securely.
Damage to the measuring tool
and/or serious injury to the user
could result if the measuring tool
falls.
ALWAYS use only the
accessories that are
recommended by the
manufacturer of your
measuring tool. Use of
accessories that have been
designed for use with other
measuring tools could result in
serious injury.
DO NOT leave measuring
tool "on" unattended in any
operation mode.
Repair and servicing must
always be performed by
a qualified repair facility.
Repairs performed by unqualified
personnel could result in serious
injury.
DO NOT use this measuring
tool for any purpose other
than those outlined in this
manual. This could result in
serious injury.
DO NOT disassemble the
measuring tool. There are no
user serviceable parts inside.
Disassembling the laser will
void all warranties on the
product. Do not modify the
product in any way. Modifying
the measuring tool may result
in hazardous laser radiation
exposure.

Electrical safety

Batteries can explode or leak,
cause injury or fire. To reduce
this risk, always follow all
instructions and warnings on
the battery label and package.
DO NOT short any battery
terminals.
DO NOT charge alkaline
batteries.
DO NOT mix old and new
batteries. Replace all of them
at the same time with new
batteries of the same brand
and type.
-7-