Catcher; Mulcher Insert; Rear Discharging - Husqvarna LC 451S Manuel D'utilisation

Catcher

• The collector's handle situated on the frame must be
placed over the collector bag.
• Place the bottom of the frame into the groove
underneath the collector. Fasten the frame by
pressing it into the groove. Start with the part of the
frame in the illustration and then press gradually
forward towards the tongue of the collector.
• A few taps with a rubber mallet may be necessary to
fasten the frame part under the tongue. Tap the frame
between the reinforcements on the tongue.
• Secure the frame by using the quick-action clips.
ASSEMBLING AND ADJUSTMENTS
• Make sure the machine's discharge deck is clean and
free from grass cuttings.
• Hook the collector onto the top edge of the chassis.
• Place the collector tongue in the machine's discharge
deck.
• Fit the bagger bottom in the discharge hole.
Mulcher insert - Accessories
A mulching-kit is available as an accessory, to make the
machines equipped with a catcher able to be used with
mulching function. The kit contains of a mulch plug and a
blade.
• Raise the discharge guard to mount / dismount the
mulch plug.
• Replace the blade with the supplied Combi blade. For
more information, see "Cutting equipment".

Rear discharging

The machine can also be used without the mulcher insert
and collector.
• Lift up the back shield and remove the catcher.
• Remove the mulch plug.
• Close the shield.
–
English 83