Switching Your Radiator On/Off; Switch The Screen On; Temperature Setting - Atlantic MARADJA Notice D'utilisation Et D'installation

GB

10.2 - Switching your radiator on/off

10.3 - Switch the screen on

10.4 - Temperature setting

To activate the screen, press on any key.
The heating light indicator
lower than the displayed temperature (set temperature).
The black arrow moves along the consumption indicator between the green and the red
levels. The temperature recommended by Ademe (French Agency for the Environment &
Energy control) is 19°C, and this arrow informs you if your behaviour is within or outside
the recommendation.

78
Press the button
for a few moments
To put your radiator
on stand-by, press
an hold (long
press) until «OFF" is
displayed.
If the screen is not
backlit, press any
button to switch the
screen on.
The temperature by
default is 19°C.
You can vary this by
pressing on the keys
and .
Wait for at least 6 hours until the temperature stabilises.
User's manual
OK
OK
Jour Heure
équilibre
OK
is displayed on the screen if the ambient temperature is
Jour Heure
équilibre
The screen lights up and indicates
the default temperature
équilibre
The radiator displays «OFF" and
then goes off.
The screen lights
OK
up.
Press the button to confirm
OK
OK