Transport And Storage; Conditions Of Use - Festo DG Serie Mode D'emploi

KSK-...
2 Method of operation and application
The connecting shaft synchronizes the rotary movement of two electric toothed-
belt axes whch are arranged parallel.
The connecting shaft is intended for transmitting the rotary movement in a horizon-
tal fitting position between axes of type DGE-...-ZR without additional external
load.
3

Transport and storage

S
Store the connecting shaft in a room at a
constant temperature level without exter-
nal mechanical load.
If the connecting shaft is subjected to
temperature fluctuations and extreme
climatic conditions, the coupling in parti-
cular may be damaged.
4

Conditions of use

Note
S Make sure that the points mentioned in this chapter are always observed.
The product will then function correctly and reliably.
S
Compare your current application with the maximum limits specified in the
chapter Technical specifications.
The maximum permitted limits (e.g. for fitting tolerances, forces, torques)
must not be exceeded.
S
Take the ambient conditions into account.
A corrosive environment will impair the
service life of the product.
16
Fig. 2
Fig. 3
Festo KSK-... 0010NH English