Quick Start - ECOVACS ROBOTICS DEEBOT MINI Manuel D'instructions

3.2 Quick Start

Charging Dock Placement
1
Place the Charging Dock on a level floor surface
against the wall with the base perpendicular
to the ground. Keep the immediate area 1.5m
(5') in front of the charger and 0.5m (1.6') on
both sides of the charger clear of objects and
reflective object surfaces such as mirrors etc.
Plug the Charging Dock in.
Install Side Brushes
2
Attach Side Brushes to the bottom of DEEBOT
by pressing a brush into each slot with the
matching color until it clicks.
Power ON
3
Turn the robot's Bottom Power Switch to the
ON position. "I"=power ON; "O"=power OFF.
DEEBOT is powered ON when the AUTO
Mode Button glows a continuous BLUE.
When DEEBOT is not cleaning, it is suggested
*
to keep it powered ON and charging instead
of powered OFF.
3. Operating and Programming
9
EN